Enter zip code to calculate shipping.
Midwest Pacific Automatic Impulse Sealers MP-12A5 are very heavy-duty, table top, impulse models. These sealers ship free in the Continental US 48 states. Automatic mode or manual mode can be switched from the console. In automatic mode, when the machine is turned on it immediately begins to cycle at a cyclic rate that is programmed from the three control dials on the face of the machine. In manual mode, the unit cycles under the control of a foot pedal switch (included).
All Midwest Pacific Automatic Impulse Sealers operate on 110 volt and are double fused. The Jaw is opened and closed by use of an electro-magnet. There are no motors, belts, gears or drive chains to wear out. They are geared to high volume production or to applications where precise control can easily be maintained even when frequently changing bags sizes and thickness. These machines are best suited for KEL-F, POLYFLEX, P.V.A., POLYETHYLENE, POLYURETHANE, POLYVINYLCHLORIDE, POLYPROPYLENE, PLIOFILM, TIVAC, SARAN and most other heat sealable materials. Each machine comes with a 90 day warranty on labor and all parts except heating element, upper and lower Teflon. (These parts are consumable - they require replacement over time based on use.)
The program dials provide control for:1. The interval that the jaw stays open between sealing cycles. 2. The interval that the jaw stays closed during sealing cycles. 3. The length of time the element is hot.
Click Here For MP-12A5 Parts