MP-24DS - 24 Inch Double Impulse Foot Sealer - Midwest Pacific - 5mm Seal

The Midwest Pacific Double Impulse Foot Sealer MP-24DS is designed to seal heavy duty Polyethylene (PE) or Polypropylene (PP) material.  The impulse heat is activated by depressing the foot pedal on the stand alone, pedestal mount unit. An indicator light is lit during the heat cycle. It is also designed to allow both hands to be free to handle the product and the bag. The unit features a solid-state timer that controls the length of the heat time, which is determined by the thickness and type of material.  The Midwest Pacific Double Impulse Foot Sealer has a heating element located on each jaw, providing impulse heat to each side of the heavy material simultaneously. The light goes out when the heat time is finished. The operator should continue to hold the pedal down for 1-2 seconds after the heat cycle to allow the bag to congeal. It seals Polyethylene (PE) bags up to 10 mil. thick. The Solid state timer adjusts from .3 second to 2.3 seconds to seal various thickness bags. It provides airtight and waterproof seals for polyethylene (PE) and polypropylene (PP) bags and some other materials (shrink film, saran, etc.).  It is NOT recommended for use on cellophane, foil, metalized, Mylar, etc.  Impulse sealers only use power and get hot when the jaw is depressed to seal a bag. Cools immediately after sealing.