Hand Heat Sealer Midwest Pacific - 20 inch with cutter - MP-20C - 1/16 In. Seal

MP-20C Midwest Pacific Hand Impulse Sealers have built-in cutters in the upper handle jaw. The cutter is slid from side to side with one hand while the other hand holds down the handle to accomplish sealing the bag. Both functions, sealing and cutting, are accomplished at the same time, making creating of a sealed, trimmed bag very efficient.  The MP-20C Midwest Pacific Hand Impulse Sealers with built-in cutters are very efficient when using tubing, because you can literally "make a bag" of any length from a roll of tubing.  The seal provides a strong airtight, waterproof seal for bags made of polyethylene (PE), polypropylene (PP), saran, some laminated, lined metalized and foil materials. NOT recommended for cellophane or similar, Mylar, some foils and metalized.  They only use power and gets hot when the seal arm is depressed to seal a bag. They cool immediately after sealing.  These machines have a solid-state timer, adjustable from .3 seconds to 1.2 seconds for sealing bags of various thickness. (Maximum of 6 mil. for PE).  110 volt standard.   They are very sturdy, yet lightweight and easy to transport.

Click Here For Parts

Uses Standard 110V outlet.

Each machine comes with a 90 day warranty on labor and all parts except heating element, upper and lower Teflon. (These parts are consumable - they require replacement over time based on use.)

This machine comes with an extra Heating Element and 1 Teflon Cover.

• Seal Length - 20 inches
• Seal Width - 2.5 mm
• Impulse Power - 620
• Maximum Material Thickness - 7 mil.