Hand Heat Sealer Midwest Pacific 8 in with cutter MP-8C 1/16 In Seal

The MP-8C Midwest Pacific Hand Impulse Sealers have built-in cutters in the upper handle jaw. The cutter is slid from side to side with one hand while the other hand holds down the handle to accomplish sealing the bag.  Both functions, sealing and cutting, are accomplished at the same time, making creating of a sealed, trimmed bag very efficient.  The MP-8C Midwest Pacific Bag Impulse Sealers with built-in cutters are very efficient when using tubing, you can literally make a bag from any length of tubing.  The seal provides a strong airtight, waterproof seal for bags made of polyethylene (PE), polypropylene (PP), saran, some laminated, lined metalized and foil materials. NOT recommended for cellophane or similar, Mylar, some foils and metalized.  These machines only use power and get hot when the seal arm is depressed.  They cool immediately after sealing.  They have a solid-state timer adjustable from .3 seconds to 1.2 seconds for sealing bags of various thickness. (Maximum of 6 mil. for PE).  110 volt standard. They are very sturdy, yet lightweight and easy to transport.

Click Here For MP-8C Parts.

Each machine comes with a 90 day warranty on labor and all parts except heating element, upper and lower Teflon. (These parts are consumable - they require replacement over time based on use.)

This machine comes with an extra Heating Element and 1 Teflon Cover.

• Seal Length - 8 inches
• Seal Width - 1/16 inch
• Impulse Power - 260
• Maximum Material Thickness - 6 mil.