1. UNPLUG UNIT
2. UNSCREW CHROME SIDE PLATES FROM SIDE OF MACHINE AND REMOVE TEFLON CLOTH COVER. THIS WILL EXPOSE THE ELEMENT WIRE
3. THE ELEMENT WIRE IS SECURED BY A RETAINING POST AT ONE END AND A
SCREW AND WASHER AT THE OTHER END. REMOVE SCREW AND WASHER TO REMOVE
WIRE.
4. INSULATOR TEFLON STRIP IS BELOW WIRE. REMOVE THIS STRIP AND ATTACH NEW ADHESIVE STRIP MAKE SURE YOU COVER ALL EXPOSED METAL.
5. REATTACH NEW ELEMENT WIRE BY CONNECTING POST SIDE FIRST AND THEN THE SCREW AND WASHER.
6. PLACE NEW WIDE TEFLON COVER OVER THE WIRE AND REATTCH SIDE PLATES
MAKING SURE THE TEFLON IS SCURED UNDER THE PLATES. TIGHTEN THE SCREW.
Replacement Instructions for Hand Impulse Sealers: Element Wires, Upper Cover and Tape
PLEASE FOLLOW THESE INSTRUCTIONS FOR REPLACING ELEMENT WIRES, TEFLON COVERS AND INSULATOR STRIPS