American International Electric I Bar Shrink Wrap Systems
AIE-2013I, AIE-2018I, AIE-2024I and AIE-2032I
Also same as AIE-450, AIE-450T2, AIE-600, AIE-600T2 and AIE-800TAIE-450,
Instructions For Installing Element Wire, And Non-Stick Tape and Cover
1. Unplug the unit.
2. Peel off adhesive backer from the lower no-stick strip and attach it to the sealing arm.
3. Place the screw through the loop on the end of the heating element and attach it to the bottom of the arm.
4. Connect the post to the power cord. Insert spring through the post.
5. Place washer through the post and push it against spring so that both fit inside the head of the sealing arm.
6. Connect the heating element to the opening on the post. Remove the adhesive backer of the upper cover and place it over the element.
